Live Webinar

65-minute live streaming program
  • September 29
  • 1:00 - 2:05 pm EST

Assessment of Aging Asbestos Cement Pipe Systems

September 29

Gain the tools to assess the condition and remaining service life of asbestos cement pipes.

Thousands of miles of asbestos-cement (AC) pipe in North America are reaching the end of their expected service life, although actual service life depends largely on pipe condition and working environment. AC pipe applications include water distribution systems, sanitary sewers, and industrial process piping. As typical replacement or rehabilitation costs for underground systems at greater than $1M per mile, system managers and owners must determine where to focus limited funds and how to optimize mainline replacement. This workshop provides AC pipe system operators with the tools necessary to assess the condition and remaining service life of AC pipes within their specific system. Application of these tools will be demonstrated using actual case studies.

Learning Objectives

  • You will be able to identify typical AC pipe degradation mechanisms.
  • You will be able to describe environmental and operational factors affecting AC pipe degradation and failure rates.
  • You will be able to discuss AC pipe condition assessment techniques.
  • You will be able to explain implementation of results from AC pipe condition assessment in remaining service life analysis.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 35 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

AC Pipe Degradation
  • Material Characterization
  • Degradation Mechanisms
  • Failure Modes
  • Factors Influencing Degradation and Failure Rates
AC Pipe Condition Assessment
  • Sample Selection and Field Documentation
  • Techniques for Evaluating Extent of Pipe Degradation and Residual Strength of Pipe
  • Laboratory Testing of Physical Properties and Chemical Composition of Pipe Samples
  • Interpretation of Test Results
Prediction of Remaining Service Life
  • Modeling Based on Pipe Condition and Actual Load Conditions
  • Modeling Based on System Leak Rates
  • Application of Predictive Models to System-Wide Replacement Plan
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 35 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

Live Webinar Registration

  • AK ENG 1.0
     
  • This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0.
     
  • AL ENG
     
  • This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDHs by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
     
  • IA ENG
     
  • This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
     
  • ID ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
     
  • IL ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.3
     
  • This program is applicable for 1.3 professional development hours through the Indiana State Board for Professional Engineers.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.0 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
     
  • MI ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.* *Please check the department rules and requirements for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 1.0
     
  • This course is applicable for 1.0 PDH's through the Missouri Board for Professional Engineers.
     
  • MS ENG
     
  • This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
     
  • ND ENG 1.0
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.0 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you.* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • NY ENG 1.0
     
  • Lorman Education Services is an approved provider through the AIA/CES. For courses or educational activities to be used towards New York's continuing education requirements, the course must be in an acceptable subject area and must also be in an approved format. Please refer to the rules of the State Board for Professional Engineering and Land Surveying in New York for further details here: http://www.op.nysed.gov/prof/pels/peceques.htm. Live Webinar Course Length: 1.0
     
  • OH ENG
     
  • This course is applicable for ethics continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.3
     
  • This program is applicable for 1.3 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.0
     
  • This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Who should attend?

This live webinar is designed for engineers, public works directors, hydrology professionals, environmental professionals, project managers, consultants, planners, government officials, contractors, and subcontractors.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 35 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Mateusz Radlinski, Ph.D., P.E.

Mateusz Radlinski, Ph.D., P.E.

Exponent Failure Analysis Associates

  • Principal Engineer at Exponent, Inc.
  • Professional practice focuses on all aspects of concrete and cement-based materials used in modern infrastructure projects
  • Performed numerous asbestos-cement pipe condition assessments including remaining service life analyses and failure investigations
  • Presented and published technical papers on asbestos-cement pipe condition assessment
  • Author of publications related to material characterization, performance evaluation, durability, and failure analysis of concrete materials
  • Member of American Society of Civil Engineers (ASCE) and American Concrete Institute (ACI)
  • Ph.D. degree in Civil Engineering, Purdue University, West Lafayette, Indiana
  • Contact information: 650-688-6752 or [email protected]
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 35 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 407392
Published 2022
Purchase Options

Register today before this event fills.