Show navigation

Live Webinar

90-minute live streaming program
  • June 25
  • 1:00 - 2:30 pm EST

Also available as:

OnDemand Webinar
Audio & Reference Manual

Tolerances and Acceptable Measurements under the ADA

June 25

ADA Standards are complex, understand the most compliant ways to utilize construction tolerances.

Dimensional tolerances as well as construction and manufacturing tolerances are included within the Americans with Disabilities Act (ADA) and its implementing regulations and standards. The tolerances are frequently misunderstood and misapplied. Knowing when and how the tolerances apply is critical for an accurate ADA evaluation of disabled access issues both on a particular site as well as in litigation. U.S. Department of Justice (DOJ) documents have provided some limited help in interpreting and applying tolerances under the ADA. Federal courts have recognized the significance of tolerances in the context of ADA access litigation and have criticized expert witness opinions for failure to consider construction tolerances. Understanding both dimensional tolerances as well as construction and manufacturing tolerances is critical to evaluating whether or not a particular component complies with accessibility requirements of the ADA. In this topic, you will develop an understanding of dimensional tolerances, construction and manufacturing tolerances, as well as the express tolerances included in the ADA. The sources available to identify conventional industry tolerances will be reviewed. Measurement tools to be used and methods of measurement, as well as applying tolerances to measurements will also be reviewed.

Learning Objectives

  • You will be able to describe the concepts of Dimensional Tolerances and Construction and Manufacturing Tolerances.
  • You will be able to identify the expressed tolerances in the ADA.
  • You will be able to recognize sources which describe conventional industry tolerances.
  • You will be able to review the types of measurement tools and some examples of recommended best practices.

Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 32 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Tolerances
  • Dimensional Tolerances
  • Construction and Manufacturing Tolerances
  • ADA Express Tolerances
Construction Tolerances
  • Conventional Industry Tolerances
  • When Applied
  • Determining Conventional Industry Tolerances for Specific Components
  • Sources to Identify Conventional Industry Tolerances
Acceptable Measurements
  • Measurement Tools
  • Measurement Methods
  • Applying Construction Tolerances to Measurements
Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 32 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Webinar

This course was last revised on January 18, 2018.

Call 1-866-352-9540 for further credit information.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Live Webinar Registration

  • AIA HSW 1.5
     
  • Lorman Business Center, Inc. is registered with the AIA Continuing Education System (AIA/CES). This 1.5 hour program offers 1.5 Learning Unit hours, which will be reported directly to the AIA/CES for AIA members. This program qualifies for 1.50 hours of Health, Safety, Welfare (HSW).
     
  • AL CLE 1.5
     
  • This course or a portion thereof has been approved by the Alabama State Mandatory Continuing Legal Education Commission for a maximum of 1.5 hours credit.
     
  • AR CLE 1.5
     
  • This course has been approved for 1.5 hours of CLE by the Arkansas CLE Board.
     
  • Arizona CLE 1.5
     
  • The State Bar of Arizona does not approve or accredit CLE activities for the Mandatory Continuing Legal Education requirement. This activity may qualify for up to 1.5 hours toward your annual CLE requirement for the State Bar of Arizona.
     
  • CA MCLE 1.5
     
  • Lorman Business Center, Inc. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.5 CLE hours of participatory credit.
     
  • CT CLE 1.5
     
  • Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.5 CLE credit(s).
     
  • GA CLE 1.5
     
  • This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.5 CLE hours.
     
  • HI CLE 1.5
     
  • This program was approved by the Hawaii State Board of Continuing Legal Education for 1.5 CLE credit hours.
     
  • IL CLE 1.5
     
  • This course was approved for a total of 1.5 hours of MCLE Credit by the Illinois MCLE Board.
     
  • ME CLE 1.5
     
  • This course has been approved by the State of Maine Board of Overseers of the Bar. Lawyers who complete this course shall receive 1.5 hours of CLE credit under M. Bar R. 12.
     
  • MS CLE 1.5
     
  • This program has been approved by the Mississippi Commission on Continuing Legal Education for a maximum of 1.5 credit hours.
     
  • MT CLE 1.5
     
  • This program has been approved by the Montana Commission of Continuing Legal Education for a total of 1.5 CLE credits.
     
  • NH MCLE 1.5
     
  • NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 90 Minutes.
     
  • NJ CLE 1.8
     
  • This program has been approved by the Board on Continuing Legal Education of the Supreme Court of New Jersey for 1.8 hours of total CLE credit.
     
  • NV CLE 1.5
     
  • This program has been approved by the Nevada Board of Continuing Legal Education for 1.5 CLE hours.
     
  • PA CLE 1.5
     
  • This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.5 hours of substantive law, practice and procedure CLE credit.
     
  • RI CLE 1.5
     
  • This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.5 hours of CLE credit.
     
  • TN CLE 1.5
     
  • This program has been approved as a distance learning format by the Tennessee Commission on Continuing Legal Education for a maximum of 1.5 hours of credit.
     
  • VT CLE 1.5
     
  • This program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.5 hours of CLE credit.
     
  • WA CLE 1.5
     
  • This program has been approved by the Washington State Board of Continuing Legal Education for 1.5 hours of Law & Legal Procedure credit.
     
  • WI CLE 1.5
     
  • This program has been approved by the Board of Bar Examiners for 1.5 hours for use toward the Wisconsin Mandatory CLE requirement.
     
  • WV MCLE 1.8
     
  • This program has been approved by the West Virginia State Bar MCLE Commission for 1.8 MCLE hours.
     
  • AK ENG 1.5
     
  • This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.5.
     
  • AL ENG
     
  • This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
     
  • IA ENG
     
  • This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
     
  • ID ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
     
  • IL ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.8
     
  • This program is applicable for 1.8 professional development hours through the Indiana State Board for Professional Engineers.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, Inc. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.5
     
  • Lorman Business Center, Inc. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.5 professional development hours.
     
  • ME ENG 1.5
     
  • This program is applicable for a maximum of 1.5 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
     
  • MI ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.* *Please check the department rules and requirements for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This course is applicable for 2.0 PDH's through the Missouri Board for Professional Engineers.
     
  • MS ENG
     
  • This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
     
  • ND ENG 1.5
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.5 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, Inc. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.8
     
  • This program is applicable for 1.8 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.5
     
  • This course is applicable for 1.5 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Audio & Reference Manual

  • Arizona CLE 1.5
     
  • CA MCLE 1.5
     
  • CT CLE 1.5
     
  • GA CLE 1.5
     
  • HI CLE 1.5
     
  • IL CLE 1.5
     
  • ME CLE 1.5
     
  • MT CLE 1.5
     
  • NJ CLE 1.8
     
  • NV CLE 1.5
     
  • VT CLE 1.5
     
  • WA CLE 1.5
     
  • WV MCLE 1.8
     
The CLE Code is ONLY a requirement when applying for CLE Credit in California (for participatory credit), Kansas, New Jersey or New York. Other states do not need to supply the CLE Code to apply for CLE credit.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Who should attend?

This live webinar is designed for presidents, vice presidents, contractors, subcontractors, engineers, architects, project managers, contract managers, developers, building owners and managers, design professionals and attorneys.

Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 32 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Cris C. Vaughan, CASp, ADAC, PA

Cris C. Vaughan, CASp, ADAC, PA

Vaughan & Associates

Cris C. Vaughan, Vaughan & Associates

  • Principal owner of Vaughan & Associates Law Offices; principal owner of ADA Consultant Services; co-owner ADA Today, LLC
  • Frequent speaker and has written numerous publications
  • J.D. degree, University of the Pacific McGeorge School of Law; B.A. degree, with honors, Western Oregon University
Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 32 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • Live Webinars
  • OnDemand Webinars
  • MP3 Downloads
  • Course Manuals
  • Audio Recordings*
  • Executive Reports
  • White Papers and Articles
  • Sponsored Live Webinars

Additional benefits include:

  • State Specific Credit Tracker
  • Members Only Newsletter
  • All-Access Pass Course Concierge

* For audio recordings you only pay shipping

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 403548
Published 2018, 2019
Purchase Options

Register today before this event fills.

Can’t attend? Order an Audio & Reference Manual from this event.