Lorman offers professional resources regarding COVID-19 and the 2020 Election

Live Webinar

60-minute live streaming program
  • February 11
  • 1:00 - 2:00 pm EST

The Use of Laser Scanning as a Quality Control Tool for Capital Project Execution

February 11

The newest technologies in 3-D laser scanning has resulted in lower costs and better model integration. Laser scanning is now being used in all facets of capital and maintenance project life cycles.

For renovation projects, laser scanning provides highly accurate 3-D as built information. For new or redevelopment projects, laser scanning can dimensionally verify prefabricated equipment and materials. Scanning can then assist with installation planning, uncovering potential conflicts. Learn the when, where and how 3-D laser scanning can be used in your projects to provide safer, more cost-effective solutions.

Register Now

Free Webinar Sponsored By

More Program Information

Why Lorman?

Over 34 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Abstract and Introductions
Safety Moment
Allied Engineering Brief
Presentation on Laser Scanning as a QA/QC Tool
  • History of Scanning
  • Some Typical Misconceptions
  • Use in Engineering/Design, Fabrication, and Installation/Construction
  • Typical Costs and Duration
  • An Example Project
Register Now

Free Webinar Sponsored By

More Program Information

Why Lorman?

Over 34 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

Live Webinar Registration

  • AK ENG 1.0
     
  • This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0.
     
  • AL ENG
     
  • This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
     
  • IA ENG
     
  • This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
     
  • ID ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
     
  • IL ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.2
     
  • This program is applicable for 1.2 professional development hours through the Indiana State Board for Professional Engineers.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.0 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
     
  • MI ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.* *Please check the department rules and requirements for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This course is applicable for 2.0 PDH's through the Missouri Board for Professional Engineers.
     
  • MS ENG
     
  • This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
     
  • ND ENG 1.0
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.0 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • NY ENG 1.0
     
  • Lorman Business Center, LLC. is an approved provider with the New York State Board for Engineering and Land Surveyors. This course qualifies for 1.0 hours for engineers. NYS will accept CE credit for any given course only once in a three year registration period.
     
  • OH ENG
     
  • This course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.2
     
  • This program is applicable for 1.2 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.0
     
  • This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Who should attend?

This live webinar is designed for engineers and construction owners, CEOs, COOs, presidents, vice presidents, project mangers, engineers, architects, designers, contractors, subcontractors, operation managers, and other similar titles within engineering and construction.

Register Now

Free Webinar Sponsored By

More Program Information

Why Lorman?

Over 34 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Robert LaCerra

Robert LaCerra

Allied Engineering and Design, Inc.

  • Project Director for Allied Engineering
  • Over 40 years in engineering and project management
  • Multi-industry background in food, chemicals, and refining
  • Expert in program management of sustaining capital
  • Trailblazer of several Quality Management Programs
William Pratt

William Pratt

Allied Engineering and Design, Inc.

  • Design Manager for Allied Engineering
  • Over 15 years in engineering and design
  • Focus in the heavy process industry
  • Expert in the use of 3D design applications
  • Responsible for all laser scanning activities
Register Now

Free Webinar Sponsored By

More Program Information

Why Lorman?

Over 34 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • Live Webinars
  • OnDemand Webinars
  • MP3 Downloads
  • Course Manuals
  • Audio Recordings*
  • Executive Reports
  • White Papers and Articles
  • Sponsored Live Webinars

Additional benefits include:

  • State Specific Credit Tracker
  • Members Only Newsletter
  • All-Access Pass Course Concierge

* For audio recordings you only pay shipping

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 408222
Published 2021
Register Now

Register today before this event fills.