Show navigation

Available in:

OnDemand Webinar
MP3 Download

Concrete Moisture Testing

Understand the meaning and usefulness of concrete moisture test data that may be presented for evaluation.

Concrete moisture testing can be a key element of any new construction or remodel project. Floor covering system failures caused by excessive concrete moisture emission are rampant and completely avoidable. The proper performance of concrete moisture testing is important, but understanding and evaluating the factors that affect test data is critical to any project. Too often the lack of understanding test data and testing parameters leads to poor choices that result in floor system failure after occupancy. This topic will arm you with the tools to understand proper use of concrete moisture tests, but more importantly to understand the meaning and usefulness of test data that may be presented for evaluation.

Runtime: 89 minutes
Purchase Options

More Program Information

Why Lorman?

Over 33 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

The Need for Concrete Moisture Testing Prior to the Installation of Floor Coverings or Coatings

  • Changes in Floor Covering Materials Mandated by Law
  • Changes in Floor Covering Adhesives Mandated by Law
  • Changes in Floor Covering Materials to Meet Consumer Demand

Concrete Moisture Test Performance

  • Concrete In-Situ Relative Humidity Testing per ASTM F2170
  • Concrete Moisture Vapor Emission Testing per ASTM F1869
  • Concrete Surface pH Testing per ASTM F 710
  • Concrete Porosity Testing per ASTM F3191
  • Concrete Electrical Impedance Testing per ASTM F2659

Evaluating Concrete Moisture Test Data

  • As Effected by Ambient Environmental Conditions
  • As Effected by Concrete Slab Design Elements
  • As Effected by Proper Versus Improper Test Procedures

Concrete Moisture Mitigation

  • High Moisture Adhesive Systems
  • Epoxy Mitigation Systems
  • Reactive Silicate Systems
Purchase Options

More Program Information

Why Lorman?

Over 33 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Webinar

This course was last revised on March 11, 2020.

Call 1-866-352-9540 for further credit information.

  • AIA 1.5
     
  • Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.5 Learning Unit hour(s). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
     
  • AICP 1.5
     
  • This course has been approved by the American Planning Association for 1.5 hours of CM credit for AICP members.
     
  • AK ENG 1.5
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.5. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • This Ondemand program is applicable for 1.5 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.5 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.5
     
  • This Ondemand program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.8
     
  • This Ondemand program is applicable for 1.8 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.5
     
  • This Ondemand program is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.5
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.5 professional development hours.
     
  • ME ENG 1.5
     
  • This ondemand program is applicable for a maximum of 1.5 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This ondemand course is applicable for 2.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.5
     
  • Lorman Business Center, Inc. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.5 professional development hours for engineers.
     
  • ND ENG 1.5
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.5 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • NY ENG 1.5
     
  • Lorman Business Center, LLC. is an approved provider with the New York State Board for Engineering and Land Surveyors. This Ondemand course qualifies for 1.5 hour(s) for engineers. NYS will accept CE credit for any given course only once in a three year registration period.
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.8
     
  • This program is applicable for 1.8 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.5
     
  • This course is applicable for 1.5 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.8
     
  • This course is applicable for 1.8 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

  • Those applying for AIA and HRCI must view 100% of the program and answer the questions following the program.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

MP3 Download

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

More Program Information

Why Lorman?

Over 33 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

George James Donnelly

George James Donnelly

George Donnelly Testing and Inspections

  • Principal at George Donnelly Testing and Inspections
  • Business focus – concrete dryness testing and floor covering system failure analysis
  • Conducts regular seminars dealing with concrete moisture emission and its effect on floor covering systems
  • Author, co-author of related articles WHEN 3 POUNDS IS NOT 3 POUNDS, Concrete In-situ Relative Humidity Testing, Friend or Foe
  • Member ASTM Committee F.06 on Resilient Flooring and E.06 on Building Standards, associate member ACI committee 302, member ICRI
  • Can be contacted at [email protected] or 501-915-0626
Purchase Options

More Program Information

Why Lorman?

Over 33 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • Live Webinars
  • OnDemand Webinars
  • MP3 Downloads
  • Course Manuals
  • Audio Recordings*
  • Executive Reports
  • White Papers and Articles
  • Sponsored Live Webinars

Additional benefits include:

  • State Specific Credit Tracker
  • Members Only Newsletter
  • All-Access Pass Course Concierge

* For audio recordings you only pay shipping

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 407164
Published 2020
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!