Learn how to calculate design loads to be flexible and provide allowances to accommodate a wide variety of potential tenant needs.
The vast majority of commercial buildings today are existing building stock constructed over ten years ago when the cost of energy was cheap and building construction codes did not regulate energy efficiency, and the buildings were largely owner occupied. Thus, their calculated design loads were specific only to known owner intended usage. Times have changed. Most commercial buildings now are leased to tenants from the outside and who only have a planned occupancy ranging from as little as one year to over 20 years, and having different design loads. Even if the building is being newly constructed, its designers must calculate its design loads to be flexible and provide allowances to accommodate a wide variety of potential tenant needs. This information will address how to manage these design load calculations.
Agenda
Faculty
Ernest A. Conrad, P.E., LEED® AP, CEM, BEAP, BOMA Fellow
Conrad Engineers
Ernest A. Conrad, P.E., LEED® AP, CEM, BEAP
- Professional engineer and former president at Conrad Engineers
- Responsible for developing solutions to challenges posed by complex commercial facilities and energy efficiency
- Developed an understanding of the behavior of moisture in building materials design
- Developed engineering solutions that protect buildings without being obtrusive
- Frequent speaker and active with several organizations
- Certified energy manager and building energy assessment professional
- Licensed professional mechanical engineer in 12 states
- M.S. and B.S. degrees, Drexel University
All of your training, right here at Lorman.
Pay once and get a full year of unlimited training in any format, any time!
- Live Webinars
- OnDemand Webinars
- MP3 Downloads
- Course Manuals
- Audio Recordings*
- Executive Reports
- White Papers and Articles
- Sponsored Live Webinars
Additional benefits include:
- State Specific Credit Tracker
- Members Only Newsletter
- All-Access Pass Course Concierge
* For audio recordings you only pay shipping
Questions? Call 877-296-2169 to speak with a real person.
More Program Information
Access to all training products $699/year
Unlimited Lorman Training
With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!
Easy Registrations
Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.
Invest in Yourself
You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.
