Available in:

OnDemand Course

Rainwater Harvesting

Become familiar with best practices regarding the design and maintenance of rainwater harvesting systems.

Many design teams are tasked with providing a rainwater harvesting system and often do not understand or have experience with the variety of codes, equipment, and multiple disciplines they may need to interface to get to an effective and cost-effective solution. They often think of the system as simply a tank and do not understand the fundamental components required to meet most plumbing or irrigation end-use water quality standards. This topic will help you create a basis of design to establish a system size and develop the primary pieces of equipment in a system. We will review system standards, codes, and maintenance of a well-designed rainwater system along with lessons learned and things to avoid. This course will highlight the integration of the rainwater harvesting system into the overall site development and stormwater management plan with a few case studies from different parts of the country.

Learning Objectives

  • You will be able to identify the primary components of a rainwater harvesting system.
  • You will be able to discuss the multiple disciplines typically involved in a commercial rainwater harvesting system and the information they should provide to a system integrator.
  • You will be able to describe and have resources to specify the major components of a rainwater harvesting system and typical system maintenance.
  • You will be able to define rainwater harvesting and differentiate it from stormwater or graywater re-use.

60 minutes
Course Exam
Certificate of Completion
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Introduction to Rainwater Harvesting

  • Rainwater Harvesting Defined - Not Stormwater or Graywater
  • Design Teams - Where Do We Start and Who Does What?
  • Market Drivers and Other Reasons to Capture Rainwater
  • Code Review and Other Building Standards

Planning and Design Development

  • End Uses
  • Tank Sizing - Supply and Demand
  • Irrigation Design
  • Plumbing Design
  • Site Conditions - Groundwater, Bedrock, Depth, and Elevations
  • Automated and Protected Domestic Water Supply

Specifying Equipment or a System

  • Prefiltration and Four Steps
  • Storage Options
  • Pumping Options
  • Treatment System Options
  • Day Tanks
  • Controls and Sensors

System Maintenance

  • Design to Minimize Maintenance
  • Do the Maintenance
  • Water Quality Testing and Recordkeeping

Bringing It All Together

  • Managing Overflow - Integrating Rainwater Harvesting Into Your Stormwater Management Plan
  • Cost-Effective RWH Systems
  • Questions and Answers
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Course

This course was last revised on January 25, 2022.

Call 1-866-352-9540 for further credit information.

  • AIA HSW 1
     
  • Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.0 Learning Unit hour(s). In addition, this program qualifies for 1.00 hour(s) of Health, Safety, Welfare (HSW). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
     
  • AK ENG 1.0
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • This Ondemand program is applicable for 1.0 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • FL ENG 1.2
     
  • This course has been approved for 1.2 PDHs by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.0 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.0
     
  • This Ondemand program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.2
     
  • This Ondemand program is applicable for 1.2 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.0
     
  • This Ondemand program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.0 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.0
     
  • Lorman Business Center, LLC. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.0 professional development hours for engineers.
     
  • ND ENG 1.0
     
  • The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers. This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • NY ENG 1.0
     
  • Lorman Education Services is an approved provider through the AIA/CES. For courses or educational activities to be used towards New York's continuing education requirements, the course must be in an acceptable subject area and must also be in an approved format. Please refer to the rules of the State Board for Professional Engineering and Land Surveying in New York for further details here: http://www.op.nysed.gov/prof/pels/peceques.htm. Ondemand Course Length: 1.0
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.2
     
  • This program is applicable for 1.2 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.0
     
  • This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.2
     
  • This course is applicable for 1.2 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

  • Those applying for AIA and HRCI must view 100% of the program and answer the questions following the program.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

David Stark

David Stark

Rainwater Management Systems

  • Lived with and evolved the design of a potable rainwater harvesting system in my home that I have maintained for over 17 years
  • Owner of Stark Rainwater, provided the first permitted rainwater harvesting systems for indoor and combined outdoor uses in the cities of Duluth and St. Paul, MN, and the second fully certified residential Living Building Challenge project in Ann Arbor, MI, 6 years
  • Installed residential and light commercial systems
  • Current position - International Design and Sales Specialist at Rainwater Management Solutions
  • Design, source, and manufacture rainwater, stormwater, and graywater systems with a team from Roanoke, VA
  • Gives presentations on rainwater harvesting and integrating rainwater harvesting and stormwater management for AIA, ARCSA, and Stormconn
  • Lead author for Rainwater Harvesting on a Superblock Scale, Plumbing Engineer, March 2019; contributing author for Saving a Rainy Day - Rainwater Capture at a Minnesota Shopping Center Supports Conservation and Stormwater Management Goals., Stormwater, May 2020
  • Served on a technical committee for the first national standard for rainwater harvesting for ARCSA/ASPE Standard 63 Rainwater Harvesting
  • Memberships - ARCSA, USGBC, ASPE
  • M.S. degree in water resource science, University of Minnesota; B.A. degree in environmental conservation, University of Colorado, Boulder
  • Can be contacted at 218-428-4413 or [email protected]
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 409333
Published 2022
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!