Show navigation

Live Webinar

90-minute live streaming program
  • July 25
  • 1:00 - 2:30 pm EST

Also available as:

OnDemand Webinar
Audio & Reference Manual
MP3 Download

Innovations in Trenchless Technology

July 25

Understand the application and design components of Horizontal Directional Drilling as it applies to your project.

Horizontal Directional Drilling has been associated with numerous utility strikes, cross bores, damage to adjacent infrastructure, overlying settlements, and loss of drill fluid to the surrounding environment. These issues have led to costly catastrophic failures and regulatory noncompliance project shutdowns. However, pipeline, telecom, power, and municipal infrastructure owners and engineers need trenchless construction options such as Horizontal Directional Drilling to rehabilitate, replace, and create new infrastructure. Trenchless construction offers higher utility density in restricted corridors, mitigates impacts to existing utilities and social impacts, and is a Green Technology. Horizontal Directional Drilling advances in design and equipment permit this trenchless technique to responsibly install underground pathways from two inches up to and exceeding 60 inches in diameter and lengths exceeding 5,000 feet including in urban areas. This topic helps owners and engineers understand the design and construction process associated with Horizontal Directional Drilling. Furthermore, this content will provide the basic design equations and example calculations demonstrating the purpose of developing adequate baseline data and assumptions necessary to support a successful Horizontal Directional Drill design and construction.

Learning Objectives

- You will be able to describe the process of design and construction associated with your Horizontal Directional Drill.

- You will be able to discuss the applicability and design components of Horizontal Directional Drilling as it applies to your project.

- You will be able to explain and assess the components of the Horizontal Directional Drilling design process.

- You will be able to review and comment on design components and design process for your Horizontal Directional Drill.

Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 31 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Feasibility of Using Horizontal Directional Drilling Design Must Be Constructible With Available Equipment and Within Industry Practices
  • Equipment Capabilities: Drill Angles, Steering
  • Subsurface Risks: Utilities, Geology, Grade and Lateral Tolerances
  • Basic Rule-Of-Thumb Criteria for Minimum Length and Geometry Based on Pipe and Drill Steel Properties
  • Preliminary Depth and Clearances for Geometry
  • Desktop Study for Issues Associated With Subsurface Conditions Utilities and Geology
  • Planning for Work Area Sizes and Layout
  • Cost Estimating Top Down and Bottom up
Design for Planning and Permitting
  • Accurate Survey Data With Locations and Elevations and Benches for Construction
  • Preliminary Geometry Calculations
  • Subsurface Risks and Associated Cost/Benefit in Planning Subsurface Exploration Program
  • Regulatory Traps Contingency Planning, Only Agree to Do What Can Be Constructed
Design for Construction
  • Integration of Subsurface Data and Geometry Calculation of Pressure Curves
  • Management of Subsurface Risks by Design and in the Contract Who Is Best Equipped to Manage Risk?
  • Plans and Specifications
Construction Engineering
  • Design and Design Assumption Verification With Instrumentation
  • Assess Pilot Drill Geometry
  • As-Built Documents
Summary
Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 31 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Webinar

This course was last revised on January 19, 2018.

Call 1-866-352-9540 for further credit information.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Live Webinar Registration

  • AIA HSW 1.5
     
  • Lorman Business Center, Inc. is registered with the AIA Continuing Education System (AIA/CES). This 1.5 hour program offers 1.5 Learning Unit hours, which will be reported directly to the AIA/CES for AIA members. This program qualifies for 1.50 hours of Health, Safety, Welfare (HSW).
     
  • AK ENG 1.5
     
  • This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.5.
     
  • AL ENG
     
  • This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
     
  • FL ENG 1.0
     
  • This course has been approved for 1.0 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
     
  • IA ENG
     
  • This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
     
  • ID ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
     
  • IL ENG 1.5
     
  • This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.8
     
  • This program is applicable for 1.8 professional development hours through the Indiana State Board for Professional Engineers.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, Inc. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.5
     
  • Lorman Business Center, Inc. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.5 professional development hours.
     
  • ME ENG 1.5
     
  • This program is applicable for a maximum of 1.5 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
     
  • MI ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.* *Please check the department rules and requirements for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This course is applicable for 2.0 PDH's through the Missouri Board for Professional Engineers.
     
  • MS ENG
     
  • This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
     
  • ND ENG 1.5
     
  • Lorman Education Services is an approved provider through the North Dakota State Board of Registration for Engineers and Land Surveyors. This seminar qualifies for 1.5 of continuing professional competence for engineers.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, Inc. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • NY ENG 1.5
     
  • Lorman Business Center, Inc. is an approved provider with the New York State Board for Engineering and Land Surveyors. This course qualifies for 1.5 hours for engineers. NYS will accept CE credit for any given course only once in a three year registration period.
     
  • OH ENG
     
  • This course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.8
     
  • This program is applicable for 1.8 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.5
     
  • This course is applicable for 1.5 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Audio & Reference Manual

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

MP3 Download

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Who should attend?

This live webinar is designed for public works managers, engineers, utility directors, city officials, project managers, contractors, subcontractors, inspectors, surveyors, developers, right of way agents, architects and consultants.

Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 31 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Brian Dorwart, PE, PG

Brian Dorwart, PE, PG

Brierley Associates

  • Senior consultant with Brierley Associates located in their New Hampshire office
  • Professional engineer and geologist for 30+ years with 25+ years’ experience with Horizontal Directional Drilling design, construction, forensic, and litigation
  • Conducts regular seminars and workshops on Horizontal Directional Drilling and Trenchless Technologies at local and national conferences, universities, and professional organizations
  • Author of several publications related to the areas of Horizontal Directional Drilling
  • B.A. degree in geology, University of Rochester; graduate studies in civil engineering at University of Buffalo; MSCE specialized in geotechnical engineering from University of Massachusetts
  • Member of ASCE, NASTT, AWWA, SME, AREMA, NASTT-NE
  • Can be contacted on his cellphone- 617-510-8090, office- 603-206-5575 or [email protected]
Purchase Options
Can't Attend?

More Program Information

Why Lorman?

Over 31 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • Live Webinars
  • OnDemand Webinars
  • MP3 Downloads
  • Course Manuals
  • Audio Recordings*
  • Executive Reports
  • White Papers and Articles
  • Sponsored Live Webinars

Additional benefits include:

  • State Specific Credit Tracker
  • Members Only Newsletter
  • All-Access Pass Course Concierge

* For audio recordings you only pay shipping

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 403551
Published 2018
Purchase Options

Register today before this event fills.

Can’t attend? Order an Audio & Reference Manual from this event.