Available in:

OnDemand Course

Contractor's Dilemma of Dealing With Bad Plans and Specs

Keep the project moving while protecting yourself from pitfalls and costly damages caused by problems with bad plans and specifications.

The mere identification of a design error or omission, in and of itself, may not warrant contractor entitlement to additional cost or time. This information will help you better understand the issues that may be caused by construction drawings that contain errors and omissions, or ambiguous contract requirements. You will also better understand the steps required to successfully and timely resolve such design defect issues and how to minimize the potential for such defects to negatively impact the ability of the contractor to achieve completion of the project within the contractual cost and time of performance constraints. In the instance that timely resolution of the issues caused by the design defect cannot be accomplished, you will be provided an overview of the steps required to document and recover cost and time of performance impacts.

Learning Objectives

  • You will be able to identify a design defect caused by an error or omission in the drawings.
  • You will be able to recognize responsibility for the contractor to mitigate or minimize the impact caused by the discovery of a design defect.
  • You will be able to discuss the ability of the contractor to recover cost and time impacts caused by design errors and omissions.
  • You will be able to explain review of contractual provisions that may shift the burden for the contractor to verify the accuracy of specific design documentation.

87 minutes
Course Exam
Certificate of Completion
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Spearin Doctrine

  • Overview of the Spearin Doctrine and What Protections It Provides for the Contractor
  • The Extent to Which the Contractor May Be Responsible for Failing to Recognize an Obvious Defect in the Design Documents
  • Review of Contractual Provisions That May Shift the Burden for the Contractor to Verify the Accuracy of Specific Design Documentation

Identification of Design Error or Omission

  • The Steps That Should Be Followed by the Contractor Upon Identification of a Design Error or Omission in the Drawings and/or Specifications:
  • Pre-Bid
    • Significance of Order of Precedence Clause
    • Incorporating Bid Exceptions and Clarifications
    • Attendance of and Participation in PreBid Meetings
  • Post-Award
    • Notice Requirements
    • Change Order Request
    • Responsibility to Mitigate Impact

Recovery of Impact Cost and Lost Time

  • Should a Dispute Arise, an Overview of Steps the Contractor Should Take
  • Document the Impacts Caused by the Design Defect
  • Quantify the Additional Costs That May Be Incurred to Correct or Resolve the Design Defect
  • Quantify the Time Lost on the Project to Resolve the Design Defect and Its Impact on Other Contract Work
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Course

Applications have not yet been submitted for Delaware, Idaho, Kentucky, Maine, New Hampshire, Ohio, Oklahoma, South Carolina, and Wyoming CLE for this course. However, if you are interested in obtaining CLE for any of the listed states or have any additional credit questions please email us at [email protected] or call us at 866-352-9540.

This course was last revised on September 17, 2020.

Call 1-866-352-9540 for further credit information.

  • Arizona CLE 1.5
     
  • The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.5 hours toward your annual CLE requirement for the State Bar of Arizona.
     
  • CA MCLE 1.5
     
  • Lorman Business Center, LLC. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.5 CLE hours of participatory credit.
     
  • CT CLE 1.5
     
  • Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.5 CLE credit(s).
     
  • GA CLE 1.0
     
  • This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
     
  • MO CLE 1.8
     
  • This course qualifies for self-study CLE credit in Missouri.
     
  • PA CLE 1.0
     
  • This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.0 hours of substantive law, practice and procedure CLE credit.
     
  • RI CLE 1.5
     
  • This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.5 hours of CLE credit.
     
  • VT CLE 1.5
     
  • This self-study program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.5 hour(s) of CLE credit. Please note: Attorneys may only claim 12 credits per compliance period in this format. This course is considered "Non-Moderated Programming without Interactivity".
     
  • WA CLE 1.5
     
  • This program has been approved by the Washington State Board of Continuing Legal Education for 1.5 hours of A/V credit under the Law & Legal Procedure category.
     
  • WV MCLE 1.8
     
  • This program has been approved by the West Virginia State Bar MCLE Commission for 1.8 MCLE hours.
     
  • AK ENG 1.0
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • This Ondemand program is applicable for 1.4 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • FL ENG 1.7
     
  • This course has been approved for 1.7 PDHs by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.4 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.5
     
  • This Ondemand program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.5
     
  • This course has been approved by the Illinois Society of Professional Engineers for 1.5 professional development hours.
     
  • IN ENG 1.7
     
  • This Ondemand program is applicable for 1.7 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.4
     
  • This Ondemand program is applicable for 1.4 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 2.0
     
  • This ondemand course is applicable for 2.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.5
     
  • Lorman Business Center, LLC. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.5 professional development hours for engineers.
     
  • ND ENG 1.5
     
  • The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers. This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.5
     
  • This course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.7
     
  • This program is applicable for 1.7 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.5
     
  • This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.5
     
  • This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.7
     
  • This course is applicable for 1.7 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

James F. Gallagher, P.E., F.ASCE

James F. Gallagher, P.E., F.ASCE

Resolution Management Consultants, Inc.

  • Principal with Resolution Management Consultants, Inc. possessing over 37 years of engineering, project/construction management, estimating, scheduling, and construction claims analysis experience
  • Practice emphasizes all areas of construction/project management dispute avoidance and construction claims resolution
  • Presenter of numerous programs to various public agencies and to the general public on topics of claims avoidance and dispute resolution
  • Past Chairman of ASCE’s Transportation & Development Institute Highway Construction Committee
  • Past Liaison for Associated General Contractors/National Association of State Facilities Administrators
  • Member of the Committee on Contract Law for the Transportation Research Board
  • Licensed/Registered Professional Engineer in 16 states
  • Fellow, American Society of Civil Engineers (ASCE)
  • B.S. degree in Civil Engineering, Drexel University
  • Can be contacted at 800-390-8800 or [email protected]
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 407976
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!