Available in:

OnDemand Course

OSHA's Cranes and Derricks Standards Update: The Litigators' Perspective on Subpart CC

Understand the Cranes and Derricks in Construction standards and keep employees safe.

Moving large, heavy loads is crucial to the manufacturing and construction industries. Despite technological advances, safety issues associated with this type of work persist. To address these issues, OSHA has issued a Cranes and Derricks in Construction standard. The standard addresses everything from operator certification requirements and mandatory crane inspections to documentation and special requirements depending on conditions at a worksite. While OSHA inspections were down during the pandemic, an increased budget and renewed enforcement emphasis mean employers should expect more inspections involving this and other construction standards in the coming months. This presentation will help employers keep employees safe and avoid OSHA fines.

Learning Objectives

  • You will be able to identify the major requirements of OSHA's Cranes and Derricks in Construction standard.
  • You will be able to define whether OSHA's Cranes and Derricks in Construction standard applies to work at your place of business.
  • You will be able to describe how to prepare for an OSHA inspection of construction work involving cranes and derricks.
  • You will be able to discuss best practices for keeping employees safe and avoiding OSHA fines involving OSHA's Cranes and Derricks in Construction standard.

65 minutes
Course Exam
Certificate of Completion
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

What Is the Scope of 1926 Subpart CC?

  • What Equipment Is Covered?
  • What Work Is Covered?
  • What Exceptions and Exemptions Are There?

What Are the Requirements of 1926 Subpart CC?

How Can Construction Employers Prepare for an OSHA Inspection of Cranes and Derricks?

  • What Steps Can Be Taken Ahead of Time?
  • What Documentation Should Employers Have on Hand?
  • What Do OSHA's Guidelines Tell Us About What Compliance Officers Will Look for?

Significant OSH Review Commission Decisions/Settlements

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Course

Applications have not yet been submitted for Delaware, Idaho, Kentucky, Maine, Oklahoma, South Carolina, and Wyoming CLE for this course. However, if you are interested in obtaining CLE for any of the listed states or have any additional credit questions please email us at [email protected] or call us at 866-352-9540.

This course was last revised on March 24, 2023.

Call 1-866-352-9540 for further credit information.

  • AIA HSW 1
     
  • Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.0 Learning Unit hour(s). In addition, this program qualifies for 1.00 hour(s) of Health, Safety, Welfare (HSW). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
     
  • BCSP
     
  • This course is applicable to safety professionals. Professionals interested in credit through the Board of Certified Safety Professionals (BCSP), please contact the board at 1-317-593-4800, or you can access the Recertification Guide here: https://online.fliphtml5.com/pbcyp/eprz/
     
  • AK CLE 1.0
     
  • Alaska attorneys may receive 1.0 hours of continuing legal education for completing this program. Please contact the Alaska Bar Association or go to www.alaskabar.org for details regarding reciprocity with other states.
     
  • AL CLE 1.1
     
  • This course or a portion thereof has been approved by the Alabama State Mandatory Continuing Legal Education Commission for a maximum of 1.1 hours credit.
     
  • AR CLE 1.0
     
  • This course has been approved for 1.0 hours of CLE by the Arkansas CLE Board.
     
  • Arizona CLE 1.0
     
  • The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.0 hours toward your annual CLE requirement for the State Bar of Arizona.
     
  • CA MCLE 1.0
     
  • Lorman Business Center, LLC. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.0 CLE hours of participatory credit.
     
  • CT CLE 1.0
     
  • Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
     
  • GA CLE 1.0
     
  • This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
     
  • HI CLE 1.0
     
  • This program was approved by the Hawaii State Board of Continuing Legal Education for 1.0 CLE credit hours.
     
  • IL CLE 1.0
     
  • This course was approved for a total of 1.0 hours of MCLE Credit by the Illinois MCLE Board.
     
  • MO CLE 1.3
     
  • This course qualifies for self-study CLE credit in Missouri.
     
  • ND CLE 1.0
     
  • North Dakota CLE policy does not allow for pre-approval of any self-study courses. This course may qualify for up to 1.0 hours of CLE credit.
     
  • NH MCLE 1.1
     
  • NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this Ondemand course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 65 Minutes.
     
  • NV CLE 1.0
     
  • This program has been approved by the Nevada Board of Continuing Legal Education for 1.0 CLE hours.
     
  • NY CLE 1.0 including Areas of Professional Practice 1
     
  • This course has been approved in accordance with the requirements of the New York Continuing Legal Education Board for up to a maximum of 1.0 credit hours in the area(s) of Areas of Professional Practice for 1.00 hour. Each hour may be counted only as satisfying one category of credit. Duplicate credit for the same hour of instruction is not permitted. This course qualifies for both established and newly admitted attorneys. Lorman Business Center, LLC. has a financial hardship guideline. Please contact customer service at 1.866.352.9539 for instructions on how to apply.
     
  • OH CLE 1.0
     
  • This course has been approved by the Ohio Supreme Court Commission on Continuing Legal Education for 1.0 CLE credit hours. Please note: No more than twelve (12) hours of self-study CLE credit for any biennial reporting period may be earned by an Attorney or Judge under Regulation 409.2. To fulfill CLE requirements for self-study, web-based programs, you must complete 100% of the polling questions during the program. Your hours will be filed electronically within thirty (30) business days by Lorman Education Services provided you fulfilled 100% attendance and polling questions answered.
     
  • RI CLE 1.0
     
  • This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.0 hours of CLE credit.
     
  • VA CLE 1.0
     
  • This program has been approved by the Virginia Mandatory Continuing Legal Education Board for 1.0 CLE credit hours.
     
  • VT CLE 1.0
     
  • This self-study program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.0 hour(s) of CLE credit. Please note: Attorneys may only claim 12 credits per compliance period in this format. This course is considered "Non-Moderated Programming without Interactivity".
     
  • WA CLE 1.0
     
  • This program has been approved by the Washington State Board of Continuing Legal Education for 1.0 hours of A/V credit under the Law & Legal Procedure category.
     
  • WI CLE 1.0
     
  • This program qualifies for 1.0 hour(s) of ondemand CLE through the WI Board of Bar Examiners.
     
  • AK ENG 1.0
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • Lorman Business Center, Inc. is an approved sponsor of professional development hours with the Arkansas State Board of Registration for Professional Engineers.
     
  • FL ENG 1.3
     
  • This course has been approved for 1.3 PDHs by the Florida Board of Professional Engineers in the Areas of Practice.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.0 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.0
     
  • This Ondemand program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.3
     
  • This Ondemand program is applicable for 1.3 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.0
     
  • This Ondemand program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.1 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 1.5
     
  • This ondemand course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.0
     
  • Lorman Business Center, LLC. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.0 professional development hours for engineers.
     
  • ND ENG 1.0
     
  • The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers. This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
     
  • NM ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.3
     
  • This program is applicable for 1.3 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.0
     
  • This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.3
     
  • This course is applicable for 1.3 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     
  • HR Certification Institute 1.0
     
  • This E-Learning program has been approved for 1.0 (General) recertification credit hours toward aPHR(TM), aPHRi(TM), PHR®, PHRca®, SPHR®, GPHR®, PHRi(TM) and SPHRi(TM)recertification through HR Certification Institute® (HRCI®). For more information about certification or recertification, please visit the HR Certification Institute website at www.hrci.org.
     
  • SHRM 1.0
     
  • Lorman Education Services is recognized by SHRM to offer Professional Development Credits (PDCs) for the SHRM-CPSM or SHRM-SCPSM. This program is valid for 1.0 PDC(s) for the SHRM-CP or SHRM-SCP.
     
The CLE Code is ONLY a requirement when applying for CLE Credit in New York. Other states do not need to supply the CLE Code to apply for CLE credit.

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

  • Those applying for AIA and HRCI must view 100% of the program and answer the questions following the program.

Virginia MCLE requirements do not allow approval for programs that do not include an audio or audiovisual component.

This program was previously offered as a live webinar. Virginia MCLE requirements do not allow approval for attendance at duplicate programs.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Brad M. Kushner

Brad M. Kushner

Stevens & Lee

  • Shareholder in the Philadelphia office of Stevens & Lee, P.C.
  • Practice emphasizes all aspects of Labor & Employment law, with an emphasis on OSHA defense and advising clients nationwide with regard to OSHA compliance
  • Regularly represents employers in proceedings before OSHA and the OSH Review Commission
  • Conducts regular seminars and workshops relating to OSHA compliance and what to do during an OSHA inspection
  • Contributor to the nationally recognized treatise, Occupational Safety and Health Law, published by the American Bar Association and the Bureau of National Affairs
  • J.D. degree, Rutgers University School of Law
  • Can be contacted at [email protected], 215-751-1949, or https://www.stevenslee.com/?pro=brad-m-kushner
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 410213
Published 2023
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!