Available in:

OnDemand Course
MP3 Download

Avoiding the Risk of Subcontractor Default

Learn best practice procedures for prequalifying subcontractors and managing subcontractor default risk.

Like a chain, a construction team is no stronger than its weakest link. In these uncertain times of increased demand for construction, stretched backlogs, labor shortages, and cost escalations, the risk of subcontractor default is at an all-time high. Subcontractor default is the weak link that can turn an otherwise successful project into an utter failure overnight. This presentation will help people responsible for entering into and administering subcontracts to recognize the causes and telltale signs of high-risk subcontractors early in the constructive process. In some cases, default can be avoided by simply subcontracting with a different subcontractor. In other cases, proactive measures can be taken to avoid or mitigate the effect of terminating a high-risk subcontractor. This topic will explore some of the options available to general contractors, construction managers, and upper-tier subcontractors to avoid the project-destroying effect of subcontractor default.

Learning Objectives

  • You will be able to describe the common causes of subcontract defaults.
  • You will be able to identify the signs of impending subcontractor default.
  • You will be able to explain the available options to avoid subcontractor default.
  • You will be able to discuss effective plans to avoid subcontractor default.

68 minutes
Course Exam
Certificate of Completion
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Introduction

  • Overview
  • What Is a Default?

Common Causes of Subcontractor Default

  • Cash Flow Problems
  • Too Much Work, Too Little Time
  • Project Complexity and Inexperience
  • Bid Busts and Defects
  • Labor Shortages and Other Outside Factors

Early Warning Signs of High-Risk Subcontractors

  • Effective Prequalification
  • Performance Clues

Default Avoidance

  • Effective Subcontract Terms
  • Proactive Project Management
  • Cure Notices
  • Supplementation
  • De-Scoping
  • Mitigating Impact of Termination

Security

  • Performance Bonds
  • Default Insurance
  • Other Forms of Security

Conclusion

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Course

Applications have not yet been submitted for Delaware, Idaho, Kentucky, Maine, Oklahoma, South Carolina, and Wyoming CLE for this course. However, if you are interested in obtaining CLE for any of the listed states or have any additional credit questions please email us at [email protected] or call us at 866-352-9540.

This course was last revised on May 31, 2023.

Call 1-866-352-9540 for further credit information.

  • AK CLE 1.0
     
  • Alaska attorneys may receive 1.0 hours of continuing legal education for completing this program. Please contact the Alaska Bar Association or go to www.alaskabar.org for details regarding reciprocity with other states.
     
  • AL CLE 1.1
     
  • This course or a portion thereof has been approved by the Alabama State Mandatory Continuing Legal Education Commission for a maximum of 1.1 hours credit.
     
  • AR CLE 1.0
     
  • This course has been approved for 1.0 hours of CLE by the Arkansas CLE Board.
     
  • Arizona CLE 1.0
     
  • The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.0 hours toward your annual CLE requirement for the State Bar of Arizona.
     
  • CA MCLE 1.0
     
  • Lorman Business Center, LLC. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.0 CLE hours of participatory credit.
     
  • CT CLE 1.0
     
  • Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
     
  • GA CLE 1.0
     
  • This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
     
  • HI CLE 1.0
     
  • This program was approved by the Hawaii State Board of Continuing Legal Education for 1.0 CLE credit hours.
     
  • IL CLE 1.0
     
  • This course was approved for a total of 1.0 hours of MCLE Credit by the Illinois MCLE Board.
     
  • MO CLE 1.3
     
  • This course qualifies for self-study CLE credit in Missouri.
     
  • ND CLE 1.0
     
  • North Dakota CLE policy does not allow for pre-approval of any self-study courses. This course may qualify for up to 1.0 hours of CLE credit.
     
  • NH MCLE 1.1
     
  • NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this Ondemand course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 67 Minutes.
     
  • NM CLE 1.1
     
  • This program has been approved by the New Mexico Minimum Continuing Legal Education Board for 1.1 hours of credit.
     
  • NV CLE 1.0
     
  • This program has been approved by the Nevada Board of Continuing Legal Education for 1.0 CLE hours.
     
  • OH CLE 1.0
     
  • This course has been approved by the Ohio Supreme Court Commission on Continuing Legal Education for 1.0 CLE credit hours. Please note: No more than twelve (12) hours of self-study CLE credit for any biennial reporting period may be earned by an Attorney or Judge under Regulation 409.2. To fulfill CLE requirements for self-study, web-based programs, you must complete 100% of the polling questions during the program. Your hours will be filed electronically within thirty (30) business days by Lorman Education Services provided you fulfilled 100% attendance and polling questions answered.
     
  • PA CLE 1.0
     
  • This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.0 hours of substantive law, practice and procedure CLE credit.
     
  • RI CLE 1.0
     
  • This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.0 hours of CLE credit.
     
  • VA CLE 1.0
     
  • This program has been approved by the Virginia Mandatory Continuing Legal Education Board for 1.0 CLE credit hours.
     
  • VT CLE 1.0
     
  • This self-study program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.0 hour(s) of CLE credit. Please note: Attorneys may only claim 12 credits per compliance period in this format. This course is considered "Non-Moderated Programming without Interactivity".
     
  • WA CLE 1.0
     
  • This program has been approved by the Washington State Board of Continuing Legal Education for 1.0 hours of A/V credit under the Law & Legal Procedure category.
     
  • WI CLE 1.0
     
  • This program qualifies for 1.0 hour(s) of ondemand CLE through the WI Board of Bar Examiners.
     
  • WV MCLE 1.3
     
  • This program has been approved by the West Virginia State Bar MCLE Commission for 1.3 MCLE hours.
     
  • AK ENG 1.0
     
  • This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
     
  • AL ENG
     
  • This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • AR ENG
     
  • Lorman Business Center, Inc. is an approved sponsor of professional development hours with the Arkansas State Board of Registration for Professional Engineers.
     
  • GA ENG
     
  • This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.1 professional development hours.* *Please check the rules and requirements in your state for compliance.
     
  • IA ENG
     
  • This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
     
  • ID ENG 1.0
     
  • This Ondemand program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • IL ENG 1.0
     
  • This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
     
  • IN ENG 1.3
     
  • This Ondemand program is applicable for 1.3 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • KS ENG 1.0
     
  • This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
     
  • KY ENG 1.1
     
  • This Ondemand program is applicable for 1.1 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • LA ENG
     
  • The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.1 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
     
  • MD ENG 1.0
     
  • Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
     
  • ME ENG 1.0
     
  • This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
     
  • MN ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
     
  • MO ENG 1.5
     
  • This ondemand course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MS ENG
     
  • This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • MT ENG 1.0
     
  • This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NC ENG 1.0
     
  • Lorman Business Center, LLC. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.0 professional development hours for engineers.
     
  • ND ENG 1.0
     
  • The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers. This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
     
  • NE ENG
     
  • This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
     
  • NH ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
     
  • NJ ENG 1.0
     
  • This course has been approved by the New Jersey Professional Board of Engineers and Land Surveyors for 1.0 professional development hours.
     
  • NM ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • NV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
     
  • OH ENG
     
  • This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
     
  • OK ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • OR ENG
     
  • This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
     
  • PA ENG 1.3
     
  • This program is applicable for 1.3 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
     
  • SC ENG 1.0
     
  • This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
     
  • SD ENG
     
  • This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
     
  • TN ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • TX ENG
     
  • This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • UT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • VA ENG 1.0
     
  • This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
     
  • VT ENG
     
  • This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WI ENG 1.0
     
  • This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
     
  • WV ENG 1.0
     
  • This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
     
  • WY ENG 1.3
     
  • This course is applicable for 1.3 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
     

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

Virginia MCLE requirements do not allow approval for programs that do not include an audio or audiovisual component.

This program was previously offered as a live webinar. Virginia MCLE requirements do not allow approval for attendance at duplicate programs.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

MP3 Download

  • AK CLE 1.0
     
  • Arizona CLE 1.0
     
  • CA MCLE 1.0
     
  • CT CLE 1.0
     
  • HI CLE 1.0
     
  • MO CLE 1.3
     
  • NJ CLE 1.3
     
  • NM CLE 1.0
     
  • VT CLE 1.0
     
  • WA CLE 1.0
     
  • WV MCLE 1.3
     
The CLE Code is ONLY a requirement when applying for CLE Credit in California (for participatory credit), Kansas, New Jersey or New York. Other states do not need to supply the CLE Code to apply for CLE credit.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Scott D. Cahalan

Scott D. Cahalan

Smith, Gambrell & Russell, LLP

  • Partner in the construction law section of Smith, Gambrell and Russell, LLP, an AmLaw 200 firm.
  • Part-time instructor of Construction and Development Law at the Georgia Institute of Technology
  • General counsel to the Georgia Utility Contractor’s Association
  • Worked for an ENR® top 50 general contractor
  • Drafted form construction contracts for the Associated Owners and Developers, a national association
  • Recognized by Chambers USA, The Best Lawyers in America, and Georgia Super Lawyers
  • Frequent author and lecturer on construction law
  • Member of the State Bar of Georgia, Northern District of Georgia, and 11th Circuit Court of Appeals
  • J.D., cum laude, from University of Georgia; B.S. in construction engineering from Iowa State University
  • Contact information [email protected], [email protected], and (404) 815-3711
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 410752
Published 2023
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!