Available in:

OnDemand Course

How to Comply With OSHA's Machine Guarding and Lockout/Tagout Program Requirements

Gain an understanding of how OSHA's lockout/tagout procedure can be achieved to protect workers from hazardous equipment.

For many years, two of OSHA's top ten most frequently cited violations have addressed inadequate machine guarding and lockout/tagout programs. Employers often struggle with balancing the need to meet production goals, while at the same time comply with OSHA's machine guarding and lockout/tagout requirements. Workers must have access to machines to perform their work, including servicing and maintenance. Guarding and deenergizing equipment can impact the ability to efficiently complete work on machines. This topic will help those individuals responsible for evaluating these situations and implementing solutions that will allow workers to complete the work that must be performed and, at the same time, protect those workers from the hazards associated with the unexpected energization of machines. One of the most difficult scenarios employers have to address involves the application of OSHA's minor servicing exception under the lockout/tagout requirements. This information is critical for employers, so they can develop an understanding of how OSHA interprets the minor servicing exception, including the alternative measures of protection referenced in 29 CFR 1910. 147.

90 minutes
Certificate of Completion
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Agenda

Machine Guarding vs. Lockout/Tagout

  • Normal Production
  • Servicing and Maintenance
  • Applicability of OSHA 1910 Subpart J and Subpart O

Case Study Introduction

  • Fatality Investigation Facts
  • Causes and Contributing Factors
  • Questions to Consider

Machine Safeguarding

  • Point-Of-Operation vs. Non-Point-Of-Operation Hazards
  • Guards
  • Devices
  • Location/Distance
  • Miscellaneous Aids

Lockout/Tagout Program

  • Procedures
  • Minor Servicing Exception
  • Training
  • Periodic Inspections

Case Study Conclusion

  • Incident Prevention/Corrective Actions
  • Applicability of Machine Guarding and Lockout/Tagout
  • OSHA Citations
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Credits

OnDemand Course

This course was last revised on February 26, 2018.

Call 1-866-352-9540 for further credit information.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.

Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

Faculty

Nick Walters

Nick Walters

Safety Controls Technology

  • Vice president of Safety Engineering Services at Safety Controls Technology (SCT)
  • Before joining Safety Controls Technology (SCT) in January 2017, he spent 25 years at the forefront of occupational safety & health while working for the Occupational Safety & Health Administration (OSHA); during his tenure, he served in OSHA’s Area, Regional, National and State Plan offices completing many assignments critical to the Agency and becoming well respected in the labor and business communities
  • An expert in OSHA policy and compliance, he has been favorably recognized by OSHA and the Department of Labor (DOL) for sustained performance and special projects imperative to the mission of OSHA
  • An effective communicator and public speaker; he has conducted more than 150 public speaking engagements for OSHA
  • An expert negotiator, he has successfully settled thousands of cases involving OSHA Citations in addition to providing testimony for the Secretary of Labor in OSHRC cases
  • B.S. degree in industrial technology, summa cum laude, Northern Illinois University in DeKalb; also obtained professional certification as a Construction Health and Safety Technician (CHST) and is an Authorized OSHA Outreach Trainer in both Construction and General Industry
  • Can be contacted at 708-382-2900 or [email protected]
Purchase Options

Add to Wishlist

More Program Information

Why Lorman?

Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.

All of your training, right here at Lorman

All of your training, right here at Lorman.

Pay once and get a full year of unlimited training in any format, any time!

  • OnDemand Courses
  • Live Webinars
  • MP3 Downloads
  • Course Manuals
  • Executive Reports
  • White Papers and Articles

Additional benefits include:

  • State Specific Credit Tracker
  • All-Access Pass Course Concierge

Questions? Call 877-296-2169 to speak with a real person.

Sign Up Today
With This Course

Access to all training products for one year
$699/year

Unlimited Lorman Training

With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!

Easy Registrations

Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.

Invest in Yourself

You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.

Product ID: 401618
Purchase Options

Available in Multiple Formats

Purchase this course and learn on your schedule!